Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
- Illumination
   Illumination check
   Spare lamps
   Replacement of lamps
   Removal of headlights
   Check of adjustment of headlights
   Antifog headlights
   Independent installation of antifog headlights
   Indexes of turns
   Back lanterns
   Illumination of licence plates
   Other lighting devices
   Illumination of the instrument panel
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications



Removal of headlights

Elements of the basic headlight (on an illustration of a headlight of models with 4 and 5-cylinder engines)

1 – рассеиватель;
2 – a rubber sealant;
3 – a reflector with the lamp case;
4 – fixing скобы;

5 – the engine of regulation of an angle of slope of headlights;
6 – a cap;
7 – a decorative overlay;
8 – the headlight case.


For headlight removal it is necessary to turn out the bolts designated on an illustration by arrows.


 PERFORMANCE ORDER

  1. Preparation, see in section Replacement of lamps.
  2. To remove a strip under headlights (body Elements see the head).
  3. Behind on a headlight to weaken a cap () to disconnect the multicontact tip and a parking light cartridge.
  4. To stretch a plait of wires with a cover through an aperture in the block headlight case.
  5. To turn out two fixing screws above from the body panel; two more under a headlight.
  6. To take out a headlight forward.
  7. Models with 4 and 5-cylinder engines: in addition to remove the case of the index of turn.

Headlight analysis

If glass of a headlight is damaged or the reflector has grown dull, it is not so necessary to replace at once all headlight. Both details it is possible to get separately, having specified the manufacturer (firms Hella or Bosch). For installation you should disassemble the removed headlight.

 PERFORMANCE ORDER

  1. To open all fixing latches round headlight glass.
  2. To remove рассеиватель and a sealing elastic band.
  3. Cautiously to hook the chromeplated decorative overlay round a reflector and to extend it.
  4. To rotate both adjusting screws until it will be impossible to raise a reflector a hand.
  5. To turn out the screw with crosswise шлицем from knot of motionless fastening of a reflector.
  6. After assemblage to adjust a headlight.

 The help: рассеиватели and reflectors (reflectors) of headlights at all it is unessential to buy at Audi. The shops trading in spare parts, receive them directly from the manufacturer (Hella or Bosch).