Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
- Body elements
   Forward bumpers
   Forward part of the car
   Cowl
   Wings
   Молдинги
   Doors
   External rear-view mirrors
   The forward and back has flown down
   Cover of a luggage carrier at a sedan
   Back door of the versatile person
   Back bumper
   The sdvizhnoj hatch
   Procleaning of apertures for a water drain
   The control of anticorrosive protection of the bottom of a body
   Salon
   Seats
+ Search of malfunctions
+ Specifications



The control of anticorrosive protection of the bottom of a body

The protective layer on the car bottom should be checked carefully and if necessary to renew. You can quite make it if you have a possibility reliably to lift and fix the car (a platform or the lift).

 PERFORMANCE ORDER

  1. Thoroughly to wash the body bottom, the following section see.
  2. To shine all bottom with a bright lamp and to survey the damaged places.
  3. The damaged places in anticorrosive protection to clear шабером, шпателем and a wire brush up to naked metal.
  4. To remove beginning corrosion if that has appeared.
  5. On the cleared surface to put a zinc paint from a spray as an anticorrosive first coat.
  6. Equal or big surfaces are processed by mastic which it is possible to put a brush.
  7. For remote seams and corners it is better to use баллончик, containing anticorrosive protection.

     Important: bitumen anticorrosive protection on the car bottom it is possible дообрабатывать only a bitumen material, polymeric anticorrosive protection in wheel niches only – PVC-PROTECTION.


 The help: it is possible to apply to anticorrosive protection of the bottom of the car only certain materials. Incorrectly chosen means are aggressive in relation to a serial anticorrosive mixture. Along with products Audi/VW aerosols and firm Teroson pastes will approach.

At anticorrosive mixture drawing it is necessary to close brakes a paper or a polyethylene film for protection against greasing droplets.

This chapter is devoted internal furnish Audi 80 – that is to those details of a body which concern car salon.





dump shop