Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
- Engines
   Basic elements
   Greasing system
   Ventilation картера
   Visual check of the engine
   Обкатка the new engine
   Engine service life
   Nominal and maximum frequency of rotation
   Restriction of frequency of rotation
   Measurement of pressure of compression
   The list of malfunctions
   Проворачивание the engine
   Hydraulic pushers
   Works on gear belt ГРМ
   The list of malfunctions
   Removal and installation of a head of the block of cylinders
   Removal and engine installation
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications



Visual check of the engine

 PERFORMANCE ORDER

  1. Examine the engine from above and from below.
  2. Places poorly soiled by oil is not an occasion to the anxiety, all engines выпотевают from time to time a small amount of lubricant means.
  3. However you should find out the reason of occurrence of oil stains under the parked car and a considerable oil dirt on the engine case.
  4. To clear the engine means for clearing of the engine or the steam-ejecting device.
  5. After a trial trip (enough several kilometres) to check, oil whence acts.

Possible places of leak

We have made the short list of places in which at engine Audi oil can act:

  • Sealing linings of a cranked shaft, camshaft (ов) and an intermediate shaft (the 4-cylinder engine). These places are closed by a casing of a gear belt
  • Sealing linings of a cover of a head of the block of cylinders.
  • Sealing lining of a head of the block of cylinders.
  • Sealing lining of the distributor of ignition (model with 4 and 5-cylinder engines).
  • Switches with a hydrodrive.
  • Sealing lining of the oil filter.
  • Sealing lining of fastening of the oil filter (model with 4-cylinder engines).
  • Sealing lining of the oil pallet.
  • Sealing lining of a cranked shaft behind (oil acts on a dividing arch the transmission engine/case).

 The help: it is possible to spend an engine sink in so-called harvest parks in which it is possible to use the steam-ejecting device for self-service. At strong pollution it is recommended to sprinkle a little before a sink on the engine means for clearing and to leave it to operate during any time. Necessarily take with itself working clothes.