Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
- Engines
   Basic elements
   Greasing system
   Ventilation картера
   Visual check of the engine
   Обкатка the new engine
   Engine service life
   Nominal and maximum frequency of rotation
   Restriction of frequency of rotation
   Measurement of pressure of compression
   The list of malfunctions
   Проворачивание the engine
   Hydraulic pushers
   Works on gear belt ГРМ
   The list of malfunctions
   Removal and installation of a head of the block of cylinders
   Removal and engine installation
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications



Nominal and maximum frequency of rotation

The internal combustion engine reaches the maximum capacity at certain frequency of rotation – so-called nominal frequency of rotation. The set большего number of turns does not give a prize on capacity. He can be of use good service unless for switching on following, higher transfer.

It is quite possible to name our engines steady against the raised frequency of rotation. The drive of valves is carried out by means of тарельчатых pushers directly with located at the top of a camshaft. Thus in movement small weights that allows to develop high frequency of rotation without danger to a drive of valves are resulted only.

Engine turns can be lifted to approximately 6300 rpm only for short time. The engine then considerably "growls" that is caused by fluctuations of a cranked shaft in its bearings.